[Application Methods] [Temperatures] [Surface Prep] [Handling & Storage] [Details]
| APPLICATION METHODS |
| |
DF-1000 can be applied by brush, roller or airless sprayer.
(See Inland Application Bulletins for additional information)
|
| APPLICATION TEMPERATURE |
| |
For best results, the temperature of the ambient air and the substrate
should be within a range of 50°-110°F.
|
| SURFACE PREPARATION |
| |
The surface must be free of any moisture, rust scale or soil. Remove any
loose material from cracks or seams with a wire brush or scraper. Oil and
grease should also be removed. In many cases water blast will be sufficient
to prepare the surface.
|
| DF-1000 HANDLING & STORAGE |
| |
DF-1000 contains a blend of solvents which is considered combustible
by D.O.T. and O.S.H.A. standards. It should be used and stored away
from flames in a well-ventilated area. Avoid prolonged breathing of
vapors and prevent contact with eyes. Read all label information and
precautions before using.
|
| DF-1000 TECHNICAL DETAILS |
| |
| Product Type: | Spray |
| Flash Point: | 105° F. |
| Specific Gravity: | 1.0 |
| Weight: | 8.32 lb./gal. |
| Solids (% by Weight): | 51.0 ± 1% |
| Solids (% by Volume): | 39.0 ± 1% |
| Elongation (ASTM-D-412): | 700% |
|
The specifications, properties and performance of materials
described herein are based on information believed to be reliable.
Product specifications are subject to change without notice.DF-1000 Overview
Printable DF-1000 Spec Sheet (PDF)
DF-1000 MSDS
